// B2B Technical Database

Find specialty materials by spec, standard or application.

B2B catalog of lubricants, composites, dielectric fluids, insulation and NDT consumables — with equivalents and bulk sourcing.

⌕

Categories

Min. required max. operating temp

7 products

Electronic & Immersion Cooling

3M Novec 7300

Temp range: -95°C … +98°C
Key standard: GWP Low / REACH

Advanced specialty fluid designed for electronic cooling applications and precision component cleaning. Discontinued product — 3M ended production of Novec (PFAS) fluids by end of 2025; availability limited to remaining stock.

Specs & Equivalents

Electronic & Immersion Cooling

Galden HT200

Syensqo (Solvay) GALDEN

Temp range: -85°C … +200°C
Key standard: RoHS

Dielectric PFPE heat-transfer fluid with wide liquid range; inert, non-flammable, leaves no residue. Common alternative to discontinued Fluorinert grades.

Specs & Equivalents

Electronic & Immersion Cooling

Opteon 2P50

Chemours (OPTEON)

Temp range: -90°C … +49°C
Key standard: REACH / RoHS

Dielectric two-phase immersion cooling fluid for high-density data centres; low-GWP alternative to Novec 649/7000-type fluids.

Specs & Equivalents

Electronic & Immersion Cooling

Shell Immersion Cooling Fluid S5 LX

Shell

Temp range: -36°C … +120°C
Key standard: REACH / RoHS

Gas-to-liquids based single-phase immersion cooling fluid with low viscosity and high purity, free of fluorinated compounds.

Specs & Equivalents

Electronic & Immersion Cooling

BitCool BC-888

Engineered Fluids

Temp range: -40°C … +150°C
Key standard: REACH / RoHS

PFAS-free single-phase immersion cooling fluid for servers and IT hardware.

Specs & Equivalents

Electronic & Immersion Cooling

AmpCool AC-110

Engineered Fluids

Temp range: -50°C … +150°C
Key standard: REACH / RoHS

PFAS-free dielectric coolant for direct immersion of EV batteries, motors and power electronics.

Specs & Equivalents

Electronic & Immersion Cooling

Galden HT110

Syensqo (Solvay) GALDEN

Temp range: -100°C … +110°C
Key standard: RoHS

Inert dielectric PFPE heat-transfer fluid; commonly specified as a replacement for discontinued 3M Fluorinert grades. Note: PFPE are fluorinated – check local PFAS regulations.

Specs & Equivalents